background image

FTA-250L O

perATing

 M

AnuAL

3

If smoke or strange odor is emitted from the main body, battery 

pack, or battery charger, immediately turn the transceiver off; re-

move the battery pack, and remove the power plug from the outlet.

A fire, leak, overheating, damage, ignition, or failure can result. Con-

tact the dealer from which you purchased this product or Yaesu Cus-

tomer Support.

Do not use the battery pack which is externally damaged or de-

formed.

A fire, leak, heating, explosion, or ignition can result.

Do not use any battery charger which is not specified by Yaesu.

A fire or failure can result.
When transmitting, keep the transceiver at least 5.0 mm (3/16 inch) 

away from your body. Use only the supplied antenna. Do not use 

modified or damaged antennas.

If charging of the battery pack cannot be completed within the 

specified charging time, immediately remove the power plug of 

the battery charger from the outlet.

A fire, leak, overheating, explosion, or ignition can result.

 

CAUTION

Do not dangle or throw this product by holding its antenna.

This product can hit and injure someone. In addition, doing so can re-

sult in a transceiver failure or damage.

Do not use transceiver in a crowded place.

The antenna can hit someone, resulting in an injury.

Do not place this transceiver in a place subject to direct sunlight 

or near a heater.

The transceiver can deform or discolor.

Do not place this transceiver in a humid or dusty place.

A fire or failure can result.

During transmission, keep the antenna as far from you as possible.

Long-time  exposure  to  electromagnetic  waves  can  have  a  negative 

impact on your health.

Do not clean the case with thinner or benzene.

Use a soft, dry cloth to clean the case.

If the transceiver is not being used for an extended period, turn it off 

and remove the battery pack for safety.

Do not drop, strike, or throw the transceiver.

A failure or damage may result.

Keep magnetic cards and videotape away from the transceiver.

The data recorded on cash cards or videotape can be erased.

Charge the battery pack within the temperature range from +5 °C 

to +35 °C (+41 °F to +95 °F).

Charging the battery pack outside this temperature range can cause 

leak, overheating, decrease in performance, or reduction in service life 

can result.

When unplugging the power cord of the battery charger, be sure 

to hold the power plug.

Pulling the power cord can damage it and cause a fire or electronic shock.

Do not use the earphones or head-phones at an extremely high 

volume level.

Hearing impairment can result.

Keep this product out of reach of children.

An injury, etc. can result.

Install the belt clip securely.

If they are installed improperly, the FTA-250L may fall or drop, result-

ing in an injury or damage.

Do not place a heavy object on the power cord of the battery 

charger.

The battery cord can be dam-aged, resulting in a fire or electric shock.

Do not use the included battery charger to charge any battery 

pack, which is not specified for use with the charger.

A fire can result.

Do not operate the transmitter near the TV or radio.

Radio disturbance can occur in the transceiver, the TV, or the radio.

Do not use any products other than the specified options and ac-

cessories.

A failure can result.

When the battery charger is not in use, remove its power plug 

from the outlet.

Before discarding the worn battery pack, affix tape or the like to 

its terminals.

Before using this transceiver in a hybrid or fuel-saving car, be sure to 

check with the auto-mobile manufacturer regarding use of the trans-

ceiver in that car.

Noise generated by an onboard electrical device (inverter, etc.) can 

disrupt the normal operation of the transceiver.

Содержание FTA-250L





































Отзывы: