Page 56
FT-991 O
peraTing
M
anual
v
oice
M
eMory
(
SSb/AM/FM
ModeS
:
r
equireS
optionAl
dvS-6
And
Fh-2
)
You may utilize the Voice Memory capability of the
FT-991
for repetitive messages. The Voice Memory system
includes five memories capable of storing up to 20 seconds of voice audio each. The maximum that any memory can
hold is 20 seconds.
Voice Memory Operation from the FH-2 Remote Control Keypad
You may also utilize the Voice Memory capability of the
FT-991
from the optional
FH-2
Remote Control Keypad,
which plugs into the rear panel’s
REM/ALC
jack.
T
ransMiTTer
C
onvenienCe
f
eaTures
Recording Your Own
Voice in Memory
1. Select the LSB, USB, AM, or FM mode using the
front panel
MODE
button.
2. Adjust
[
MIC
GAIN
] on the LCD, as described on
page ##.
3. Press the [
MEM
] key on the
FH-2
. A blinking “
REC
”
icon will appear in the display.
4. Press any of the
FH-2
’s keys numbered [
1
] through
[
5
] to select that memory storage register.
A
dvice
:
If you do not press the
PTT
key (see next step) with-
in five seconds, the memory storage process will be
cancelled.
5. Press the microphone’s
PTT
switch momentarily.
The “
REC
” icon will glow steadily and recording
will begin.
6. Speak into the microphone in a normal voice level to
record the message (such as “CQ DX, CQ DX, this
is W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Char-
lie, Over”). Remember that the time limit for record-
ing any message is 20 seconds.
Checking Your Recording
1. Be sure that [
MOX
] and [
BK-IN
] on the LCD dis-
played by pressing the
F(M-LIST)
button
are “Off”.
2. Press the
FH-2
[
1
] ~ [
5
] key (whichever one you just
recorded in). The “
PLAY
” icon will appear in the
display and you will hear the contents of the Voice
Memory you just recorded.
A
dvice
:
You may adjust the playback level of the recording via
Menu item “
009 RX OUT LEVEL
”.
7. Press the
FH-2
[
MEM
] key to terminate the message
storage process.
Содержание FT-991
Страница 2: ......
