background image

1

FT-818 Operating Manual

The 

FT-818

 is a compact, innovative multiband, multimode portable transceiver for the 

amateur radio MF/HF/VHF/UHF bands. Providing coverage of the 160-10 meter bands 

(include the 60 m band: USA version) plus the 6 m, 2 m, and 70 cm bands, the 

FT-818

 

includes operation on the SSB, CW, AM, FM, and Digital modes, yielding the most com-

prehensive performance package available for portable operation.
Designed for use either from an external DC power source or internal batteries, the 

FT-

818

 provides five watts of power output from a 13.8-Volt external power supply. When 

using the 

SBR-32MH

 Ni-MH Battery Pack or 8 “AA” Alkaline Cells (not supplied), the 

FT-818

 automatically switches to 2.5 Watts of output power. Via the Menu system, “High” 

power may be selected during battery operation, providing as much as 6 Watts of output, 

depending on the operating frequency.
The multi-function Liquid-Crystal Display includes Blue, Amber, and Violet backlight-

ing, which may be disabled for battery conservation. The display includes bar-graph 

indication of power output, ALC voltage, SWR, and modulation level. Also include are a 

number of operating status icons, as well as the function displays for the three operating 

function keys (

, and 

).

Among the advanced features of the 

FT-818

 are many incorporated only in large 

base-station transceivers. These include Dual VFOs; Split-Frequency operation; IF Shift; 

Clarifier (“R.I.T.”); IF Noise Blanker; AGC Fast/Slow/Auto/Off selection; RF Gain and 

Squelch control; IPO (Intercept Point Optimization) and a receiver front-end Attenua-

tor; AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic 

Keyer; Adjustable CW Pitch; Automatic FM Repeater Shift (ARS); Built-in CTCSS En-

coder/Decoders; ARTS™ (Auto-Range Transponder System); Smart Search™ Automatic 

Memory Loading System; Spectrum Scope; 200 Memories plus Home Channels and  

Band-limiting Memories; Alpha-Numeric Labeling of Memories; Automatic Power-Off 

(APO) and Time-Out Timer (TOT) functions; Computer Interface capability; and Cloning 

capability.
We urge you to read this manual in its entirety, so as to gain a full understanding of the 

amazing capability of the exciting 

FT-818

 Portable Transceiver.

Introduction

Содержание FT-818
















Отзывы: