background image

1

FT-70DR/FT-70DE Operating Manual

Introduction

Thank you for purchasing this Yaesu product.

 

P

The 

FT-70DR/FT-70DE

 is a handheld transceiver for operation in the 144 MHz 

and 430 MHz Amateur radio bands. It is compatible with the Analog FM and C4FM 

modes.

 

P

The 

FT-70DR/FT-70DE

 is rugged and compact (W60 × H98 × D33 mm (

2.36″ × 3.86″ 

× 1.30″

)) providing splash, water, and dust resistant features conforming to IP54 for 

mobile and field operation.

 

P

The AMS (Automatic Mode Select) feature automatically selects the analog FM and 

C4FM digital modes, according to the signal of the other station.

 

P

With the GD-ID (Digital Group ID) feature (

19

), the Group Monitor (GM) feature 

enables automatically locating, and communicating with other stations that have the 

same DG-ID number within contact range, by utilizing a matching group ID number 
from 00 to 99.

 

P

The Digital Personal ID (DP-ID) feature may communicate only by the transceivers 

registered the individual ID information that is different for each transceiver included 
in the transmission radio wave of C4FM digital communication.

r

  Compatible with analog FM mode and C4FM digital modes................................................   16

r

  Equipped with AMS (Automatic Mode Select) Feature  .......................................................   16

r

  The DG-ID function automatically checks to find if there are any stations with 

 

the GM function in operation on the same frequency within communication range  ..................   19

r

  The DP-ID feature may recall/standby only the other stations that are set with 

 

the C4FM Digital transceiver specific number.  .......................................................................   34

r

  High-brightness LED for easy viewing of the MODE/STATUS indicator  ...............................   4

r

  Supports Yaesu WIRES-X Internet linking, enabling communication with 

 

remote partners via the Internet  ..........................................................................................   30

r

  Dustproof and water-splash-resistant design, equivalent to IPX54, which protects 

 

the transceiver from dust and splashes  .................................................................................   10

r

  Wide-band reception over the range of 108.000 MHz to 579.995 MHz  ..............................   15

r

  A wide variety of scan features  ...........................................................................................   27

r

  A variety of individual selective calling functions; such as tone squelch (CTCSS) and DCS functions  ....   34

r

  Large-capacity 999 memory channels  ................................................................................   24

r

  6 home channels and 50 pairs of PMS memory channels  ........................................  26,  29 

r

  Create mnemonic tags for memory channels and Home channel  ......................................   26

r

  Connecting to an external power supply ................................................................................   4

r

  Automatic power off (APO) feature turns the transceiver OFF after a preset time period ......   35

r

  Data terminal (Mini USB) for connection to a PC and firmware updates ...............................   4

We urge you to read this manual in its entirety, and also the Advance Manual (available for down-

load on the Yaesu website), to gain a full understanding of the amazing capability of the exciting new  

FT-70DR/FT-70DE

 Transceiver.

Содержание FT-70DR













































Отзывы: