5
FT-70DR/DE Advance Manual
5. Press and hold the [
GM
] key.
• When registering in the DP-ID list is finished, “COMP”
is displayed for three seconds, then the display re-
turns to the DP-ID list screen.
• If not registering the DP-ID, press the [
GM
] key.
• If registering several DP-IDs, repeat step 4 and 5.
• A maximum of 24 stations may be registered.
6. Press the
PTT
switch to save the setting and return to normal operation.
• Similarly, register all of the communicating transceivers’ DP-IDs to the DP-ID lists
of the other stations.
• The DP-ID setting is complete.
When using the DP-ID function in the Voice FR mode(Voice Full Rate Mode)communication
mode, turn the battery saver function OFF in the Set Mode [48 RX SAVE] (see 39).
For communicating using the DP-ID function, register the DP-ID of each other’s transceiver on
both transceivers. By registering the DP-ID, users may communicate even if the Digital group ID
(DG-ID) is a different setting.
DP-ID: bbbbb
DG-ID: TX02 RX02
DP-ID: ccccc
DG-ID: TX01 RX01
DP-ID: aaaaa
DG-ID: TX01 RX01
DP-ID list
B station's DP-ID “bbbbb”
A station and C station do not register
the DP-ID of each other’ s transceiver
on both transceivers, but each
transceivers may communicate
because the same DG-ID is set to
both transceivers.
A
B
C
DP-ID list
A station's DP-ID “aaaaa”
DP-ID list
B station's DP-ID “bbbbb”
Each transceivers may communicate
even if the Digital Group ID (DG-ID) is
a different setting because A Station
and B station register the DP-ID of
each other’ s transceiver on both
trasnceivers.
B Station may not receive the C
station's signal because B station does
not register the C station's DP-ID.
C station may receive the B station's
signal because C station register the B
station's DP-ID.
●
Deleting the registered DP-ID
1. Press and hold the [
F
] key to enter the Set Mode.
2. Rotate the
DIAL
knob to select [17 DP-ID].
3. Press the [
F
] key.
The DP-ID list is displayed.