24
FT-70DR/DE Advance Manual
Reset All
Use this procedure to restore all settings to their original factory defaults. All Memories
will be cleared by this procedure.
CAUTION!
Resetting will clear all memories and all settings to the factory default. Be sure to make a note of the
Memory Channel and Set Mode settings, etc. before resetting.
1. Turn the transceiver OFF.
2. Press and hold the [
MODE
] key, [
HM/RV
] key and
the [
AMS
] key simultaneously, while turning the
transceiver ON.
The beep sounds and the confirmation screen is
displayed.
3. Press the [
F
] key to sound beep and reset all fac-
tory defaults.
• After resetting all defaults, the call sign input
message appears on the LCD. Set the call sign.
(See the operating manual)
To cancel the resetting, press any key except the [
F
] key.
Set Mode Reset
The Set mode only reset will restore all the Set Mode Items to the default settings. The
user memory channels will not be reset.
CAUTION!
Resetting will clear all Set Mode MENU items to the factory default. Be sure to make a note of any
user customized Set Mode settings, etc. before resetting.
1. Turn the transceiver OFF.
2. Press and hold the [
MODE
] key and the [
V/M
]
key and turn the transceiver ON simultaneously.
The beep sounds and the confirmation screen
is displayed.
3. Press the [
F
] key to sound a beep and reset
the Set Mode settings.
To cancel the resetting, press any key except the
[
F
] key.
The Set Mode Reset may not reset the following Set Mode items.
To restore all of the following Set Mode items to default, perform All Reset:
1 ANT.ATT
8 BELL
9 BNK.NAM
11 CLK.SFT
13 DCS.INV
19 DT SET
33 MEM.NAM
35 NM/FRQ
36 OPN.MSG
37 PAG.ABK
38 PAG.CDR
39 PAG.CDT
41 PSWDWT
44 RF SQL
46 RPT.FRQ
47 RX MOD
49 SCM.WTH
50 SCV.WTH
54 SQL.EXP
61 W/N.DEV
62 MYCALL