manualshive.com logo in svg

Yaesu FT-70DE, Инструкция по эксплуатации

Поделиться
Скачать
Yaesu FT-70DE Скачать руководство пользователя страница 18

Communications (Data communication with the FT-70DR/DE)

•  Get Data from FT-70D

This command transfers the settings data of the FT-70DR/DE to the ADMS-10 programmer. To commu-

nicate with the FT2DR/DE and create a new data file. Click the left mouse button on the "Get Data from 

FT-70D" parameter in the "Communications" menu. The "Get Data From FT-70D" window will open. Con-

nect the supplied USB cable between the FT-70DR/DE and the computer.

Follow the on-screen instructions to acquire data from the FT-70DR/DE. When the data transfer is com-

pleted, the template screen received from the FT-70DR/DE appears on the computer display.

The memory channels and configuration menu data may be edited using the ADMS-10 software tools.

This template and configuration data may be saved to the computer hard drive, using the 

"Save" or  "Save as" commands in the "File" menu.

•  Send Data to FT-70D

This command downloads the ADMS-10 data from the computer to the FT-70DR/DE

Click the left mouse button on the "Save Data to FT-70DR/DE" parameter in the "Communications” 

menu. The transmission procedure screen will open.

To load a previously created data file to the FT2DR/DE, click the “Open” parameter in the “File” 

menu, and open the desired file before performing the send data operation above.

Connect the supplied USB cable between the FT-70DR/DE and the computer.

Follow the on-screen instructions to transmit data to the FT-70DR/DE. After the data transmission com-

pletes, “Completed” will appear on the computer display, and click the [Close] button. Then, remove the 

plug of the USB cable and battery charger (SAD-18B/SAD-11) from the FT-70DE/DE, after installation of 

the battery pack, the FT-70DR/DE will automatically start up in accordance with the set data.

•  Never disconnect the programming cable while data transmission is in progress.

•  Pay careful attention to the power cable and the connections to the FT-70DR/DE and the 

computer, so as not to lose the power during data reception/transmission.

17

ADMS-10 Instruction Manual

Содержание FT-70DE

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды