Yaesu FT-4VE, Руководство по эксплуатации

Страница: 26 / 40

24
Weather Alert Scan (In the USA)
This feature allows you to check the Weather Broadcast Memory Channels
for the presence of the NOAA Alert Tone while operating using VFO scan or
Memory channel scan.
When the Weather Alert Scan feature is engaged, the
FT-4VR/VE
will check
the Weather Broadcast Channels for activity every five seconds while scan-
ning. If you watch the display carefully, you'll observe the scanner periodically
shifting to the Weather Broadcast channel, scanning the Weather channels
quickly in search of the Alert Tone, after which regular scanning will resume
for another five seconds.
1. Press and hold the Function key to enter the Set Mode.
2.
Press the [▲] key or [▼] key to select the “ 46 WX ALT ”.
3. Press the Function key, then press the [

] key or [

] key to select “ ALT.
ON ”.
4. Press the PTT switch to save the setting and return to normal operation.
5. Press and hold the [

] key or [

] to start scan-
ning.
Scanning starts and the display will remain on the
VFO frequency, but every five seconds the trans-
ceiver will scan the Weather Broadcast Channels
for activity.
6. Press the [ MR ] key to return to normal operation.
For additional details on the following functions, refer to the Advanced
Manual which may be downloaded from the Yaesu website.
Skip Memory Channel
Skip memory channels: Permits designating undesired channels to be
skipped during scanning.
Programmable Memory scan (PMS)
This function scans only the range of frequencies between the lower and
upper limits registered in a pair of PMS Programmable Memory channels. 10
sets of PMS memory channels (L01/U01 to L10/U10) are available.
Dual Receive (DW) feature
The transceiver checks for signals on the frequency registered to the selected
memory channel (Priority Memory Channel) once approximately every 5 sec-
onds.