DMU-2000 D
ATA
M
ANAGEMENT
U
NIT
Page 35
Quick Point
: In the Step 2 above, before doing a check for a duplicate QSO, a copy is made of the QSO record, and you
may then do editing of that record. Use the [
F1
(
)], [
F2
(
)], [
F3
(
)], and [
F4
(
)] keys to select an item from among
“
CALL
,” “
RST
,” “
BAND
,” “
MODE
,” and “
REM
;” when you press the [
F5
(
ONLY THIS
)] key you’ll copy only that item.
When you press the [
F7
(
EXIT
)] key, the display image changes to what you see on page 29; press the keyboard’s [
EN-
TER
] key to do a duplicate check, and press the [
ENTER
] key once more to return to the log input page and copy the data.
If you select a line of data using the [
F1
(
)] and [
F2
(
)] keys, pressing the [
F6
(
ALL SELECT
)] key followed by
[
F7
(
ENTER
)] key will cause the display image to change to what you see on page 29, and you may now press the
keyboard’s [
ENTER
] key to do a duplicate check. Press the [
ENTER
] key once more to return to the log input page and
copy the data to that page (however, the “
NUMBER
,” “
RST
,” “
BAND
,” and “
MODE
” data will not be copied).
L
OG
B
OOK
F
UNCTION
1.
Referring to Figure
on page 29, press the [
F2
(
)]/
[
F3
(
)] key to select the log data to be Editing, then
press the [
F4
(
EDIT
)] key to open the “
EDIT MODE
”
list.
2.
Now you may use the arrow keys on your keyboard to
move the highlighted area through the log.
3.
Use the keyboard to change data within the currently-
highlighted area.
4.
Press the [
F4
(
RECORD
)] key when you are finished
editing the entries you have worked on.
If you do not wish to save your changes, press the
[
F5
(
UN-RECORD
)] key instead.
Advice
: Data may easily be deleted, if you make a mis-
take, enter duplicate data accidentally, etc.
To erase data, use steps 1 and 2 above to select the data to
be erased. Then press the keyboard’s [
ESC
] key; the data
will be deleted. Press [
F4
(
RECORD
)] to return to the
screen depicted on page 29 and end this procedure.
“
E
DIT
M
ODE
”
L
IST
L
OG
B
OOK
P
REVIOUS
-QSO C
HECK
(
CHECK
)
It is possible to check the log in search for previous QSOs with a particular station. When a log entry of interest is found,
you may edit the information on that line, if you like.
1.
Referring to the Figure
on page 29, enter the de-
sired callsign into the “
CALL
” field.
2.
Press the [
F4
(
CHECK
)] key to show a list of any pre-
vious QSOs with the specified station within the cur-
rent log. Any previous QSOs will appear on a
“
CHECK MODE
” list.
3.
Use the [
F1
(
)], [
F2
(
)], [
F3
(
)], and [
F4
(
)] keys
to scroll through the data on the “
CHECK MODE
”
list.
“
C
HECK
M
ODE
”
L
IST
E
DITING
L
OG
B
OOK
E
NTRIES
Previously-entered log data may be edited alter, if desired.
