Yaesu FR5DR Скачать руководство пользователя страница 44

Страница: 44 / 80

Band Scope

The Spectrum Analyzer presents a view of operating activity on channels above and be-

low the current main band operating frequency as the center.

1. Press the [

menu

] key, and then touch [

SCOPE

If [

SCOPE

] is not displayed, touch [

FWD



] to display

[

SCOPE

] and then touch it.

2. With the current frequency in the center, the signal

strengths of 39 channels bandwidth are shown on a

graph.

3. Touch [

STOP

The band scope scanning stops.

•

To resume band scope scanning, touch [

SEARCH

4. To turn the Band Scope OFF, press the [

BACK

] key.

• The band scope channel interval is the same as the VFO frequency step.

• In the frequency range of 108 MHz to 580 MHz, “FULL” is displayed and scanning

continues continuously. The received audio can be heard during the scan.

• In frequency ranges other than 108 MHz to 580 MHz, “1Time” is displayed, and scanning

is stopped after one scan. Received audio is not heard during scanning. If [

SEARCH

] is

touched or the

DIAL

knob is turned to change the frequency, one scan will be performed

automatically.

Change frequency

⿠

When a signal on the scope screen is touched, the frequency in the vicinity becomes

the receive frequency, and is set to the center frequency of the scope.

⿠

The receive frequency may also be changed by turning the

DIAL

knob.

Change the number of channels displayed

The number of channels to be displayed may be set to

19CH, 39CH or 79CH, by touching the channel display

area at the top right of the scope screen.

Содержание FR5DR

















































































Результаты поиска

Содержание FR5DR

Отзывы:

Похожие инструкции для FR5DR

Бренды по названию

Популярные бренды

Yaesu FR5DR, Руководство по эксплуатации

Результаты поиска

Содержание FR5DR

Отзывы:

Похожие инструкции для FR5DR

Бренды по названию

Популярные бренды