Yaesu FR5DR, Руководство по эксплуатации

Страница: 12 / 80

10
● PGM (Primary Memory Group Activity Monitor) Screen (Press the [PMG
●
] key)
Up to 5 frequencies registered in PMG are displayed, and the signal strength received
by each channel is displayed as a bar graph.
YAESU
⿠ Touch the bar graph to instantly switch the receiver to
that frequency.
⿠ Information on the selected channel is displayed at the
top of the screen, and you can transmit immediately by
pressing PTT.
●
CAM (Channel Activity Monitor) Screen (Press the
[
F menu
]
key

Touch
[
CAM
]
)
Frequencies that are often used with friends can be registered to the CAM group mem-
ory channels, and then displayed on the CAM screen. The signal status and strength of
each channel in the selected group are shown in a bar graph.
YAESU
⿠ Touch the bar graph to instantly switch the receiver to
that frequency.
⿠ CAM Group: Up to 10 groups, with up to 5 memory
chan- nels each, can be registered in each group.
● Band Scope Screen (Press the [ F menu ] key

Touch [ SCOPE ] )
In VFO mode, the Band Scope searches the channels above and below the center re-
ceive frequency at high speed. The signal strengths are displayed on a graph, so the
presence or absence of a signal on any channel is easily noted.
⿠ The frequency may be changed by turning the DIAL
knob.
⿠ Touch [SEARCH] or [STOP] to begin or stop the search.
⿠ The number of channels to search in Band Scope may
be set to 19, 39 or 79. (See “Change the number of
channels displayed” page 42).
⿠ To end the Band Scope function, press the [ BACK ] key.
● GM (Group Monitor) Screen (Press the [ GM/X ] key)
Automatically listens for stations operating with GM function on the same frequency,
that are within the communication range, and displays the call sign, direction, distance,
within / outside. For details, refer to the separate GM Instruction Manual which is avail-
able on the Yaesu website.
⿠ The call signs of the stations that can communicate is
displayed in white characters.
⿠ The call signs of stations outside the sphere of commu-
nications are displayed in gray characters.
⿠ Touch [ APL ], to display the positions of multiple mem-
ber stations on the compass screen, centered on your
own station.
⿠ Touch [ LOG ] to view previously sent or received mes-
sages and photos.
⿠ To end the GM function, press the [ GM ] key.