Verifying the magnetic alarm connection?
When you have activated, the small LED-light on the accessorie should blink
rappidly when the connection is OK. If connection failed it will only turn the LED-
light on once for aprox 1-2 sec. If you do not get any response in the app, try again.
When activation is successfull you are ready to mount the magnet alarm. Please
wait approx 2 minutes before you connect another alarm accessory to the G32
system.
Mounting
The sensitive mat sends an alarm if anybody stands on it. The mat can be placed
outdoors under a roof but is not enough water resistant to be placed in wet out-
door environments. The mat should be placed under a normal mat as a protection.
The sensor and wire should be hidden at a preferable place. The signal from the
sensor part to the alarm unit will pass through walls and a big variety of materials.
However, check the signal before mounting. After the accessory has been connect-
ed to the alarm you are able to push the button on the circuit card fast. If the LED
light on the circuit board is flashing this means that the distance range is enough.
You will receive an alarm directly in your phone if the battery in the accessory has
to be changed.
