14
4. Connect the power cable to the boat
Your Fishfinder include a 1.5m long power cable, which is used to connect to the
transducer and battery. Properly connect the power cable to the transducer and
battery, then it is ready to use.
Caution:
some boats may have 24 or 36 volt electric system, however for your
Fishfinder, only 12 volt electric system could be adopted. Any damage from the
surplus power will void your warranty.
Note:
for the purpose of minimizing the potential of interference with other electronic
facilities, we suggest you using a seperate power source for the sonar unit.
Note:
we are not responsible for over-voltage or over-current failures. For presenting
such possible failures happening, we suggest you using a 3Amp fuse.
(figure-12)
(figure-13)
