20
Network setting
Operation
As the baud rate and protocol are self-adaptive, the PTZ cameras may not response for seconds
on power up. It is recognizing the commands and adapting the setting.
Digital Noise Reduction
The function is off as default.
When the camera is in color mode, it is recommended to turn off DNR, or there will be video trails.
When the camera is in mono mode, call preset 27 to turn on/off this function. There are 1~5 steps
from low to high. The higher the level is, the better the image quality is, but there will be more
video trails.
Soft Address
The camera address can be changed via presets 62 and 63. The new address will take effect after
the camera is rebooted.
Safe Position of Thermal Camera
When the PTZ camera is stand by, call preset 34 and the PTZ camera will tilt to -90Deg and hide
the thermal camera to a safe position. The PTZ camera does not respond to any command until
preset 56 is called and the thermal camera moves away from the position.
STANDBY NOW
CALL PRST 35 TO EXIT