— 26 —
Appendix B. Troubleshooting
Situation
Possible cause and correction
The LED does not
signal after the Device is
turned on
1. No power supply on the bus
. Check if the bus
power is supplied (NMEA 2000 network requires a
separate power connection and cannot be powered by
a plotter or another Device connected to the network).
2. Loose connection in the power supply circuit
.
Treat the Device connector with a spray for cleaning
electrical contacts. Plug the Device into another
connector.
Memory card is inserted
into the Device, but red
light is flashing.
1.
Card is not formatted correctly
. Reformat card
(see IV.). 2.
Card contains logic error.
It is possible
for such errors to go unnoticed by scanning utilities,
recommendation to reformat card. 3.
No more free
space on card
. Check the card and whether the value
of the parameter DELETE=NO in the YDVR.CFG file
(see VI.)
Card is inserted into the
Device, but only 1 single
green signal is given
when powered on.
1. Loose connection in the data circuit.
Treat the
Device connector with a spray for cleaning electrical con-
tacts. Plug the Device into another connector.
File system of MicroSD
card is corrupted
1. Device cannot complete the shutdown of the
file system after power off.
R
eplace the card by
MicroSD Class 10 card from well-known manufacturer
(see III.7-III.9).
Содержание YDVR-03
