Yach Watchman Yacht Sentinel, Руководство пользователя

Страница: 11 / 21

11
(Parameters Description continued)
SUPPLYALARM=ON
Indicates that the battery alarm is enabled
BATT=12
12 V battery type used
MOVEALARM=OFF
Indicates that the move alarm is enabled
RADIUS=20
Gives the range in meters for the move alarm
ANCHOR=OFF
Indicates that the anchor alarm is enabled
SWING=20
Gives the range in meters for anchor swing
Status – Lets you see the actual status of battery states, position, course and speed.

Enter “4444, status?” (4444 is default password. See “Change
Password” to change)

You should see the following on your phone display:
(Note: This is an example. Your display may differ depending on your
parameters:
YACHT Sentinel
MY BOAT
MMSI=680038636
FW=20090720
GSM=-89dbm
BOATBATT=11.7V
VBATT=4.2V
TEMP=25
GPSFIX=YES
TIME=11:26:35
DATE=31-05-12
LAT=
52 06.4445N
LONG=
008 39.8726E
SOG=33
COG=74
Status Description
SMS text Description
YACHT Sentinel
Device logo
MY BOAT
Name of the boat
MMSI=680038636
The MMSI set by the user (default 000000000)
FW=20090720
Firmware version
GSM=-89dbm
GSM level
BOATBATT=11.7V
Voltage of the boat battery / external power supply
Note : If BATT is set to OFF then the Yacht Sentinel will write SHOREPOWER=YES/NO in
the SMS instead of BOATBATT.
VBAT:4.05V
Voltage of the internal battery
TEMP:25
Temperature measured in °C
GPSFIX:YES
YES’ if the device can receive the GPS position. Otherwise NO
TIME=15:26:35
Time when GPS was identified (GMT)
DATE=15-11-12
Date when GPS was identified (date-month-year)
LAT:52 06.4445,N
Latitude
LONG:008 39.8726,E
Longitude
SOG:33
Speed over ground measured in knots
COG:74
Course over ground