Yaber YA10, Руководство пользователя

Страница: 5 / 10

Getting Started
Charging your Jump Starter
1. Please use a 5V2A/9V2A/12V1.5A
adapter to charge the product.(Type C
cable is included, adapter is not
included)
2. Using a 5V/2A adaptor, it will take
approximately 4 hours to fully charge
the unit. In order to extend the battery
life it is recommended to fully charge
the unit every 3-6 months.
Turn On your Jump Starter
Short press the power switch to boot the system, the battery indicator lights
will turn on. For energy saving, the system will turn to standby mode if there
is no operation within 20 seconds.
LED Light
Long press the power switch more than 3 seconds to turn on the light
mode. There are four modes which are illumination, flash, SOS and
warning mode (warnings), simply short press the power switch button to
change the 4 modes or turn off the light mode. And you can also press the
power switch button for more than 3 seconds to turn off the light mode.
QC3.0 & 5V 2.1A Dual USB Output
This portable jump starter is also equipped with two smart USB outputs
that provide the fastest charging speed(USB1 - QC3.0:5V2.4A/9V2A/12V
1.5A; USB2 - 5V2.1A) for your portable electronic devices, such as
phones,tablets, bluetooth earphones, etc
（
adapter is not included
）
support@yaberauto.com
EN
04