Yaber YA10, Руководство пользователя

Страница: 6 / 10

Start your Car
1.Insert the plug of the smart clip complete-
ly into the jump starter, the green and red
lights flash alternately.
2.Correctly clip the red and black clamps to
the electrodes of the car battery (red to
positive and black to negative)(The green
light stays on)
3.Start the vehicle.
4.When the vehicle is started, remove the
jumper cable from the vehicle battery
immediately.
In any of the following situations, the smart clamp turns on protection
mode:
LED Indicator
The red/green led will flash
The green light is always on
Situations
Ready to work
Work status
support@yaberauto.com
EN
05