Yaber Y61, Инструкция по эксплуатации, Страница: 7 / 66

FAQ
4. Exposure to direct sunlight, smoke or steam may damage internal
components.
5. Handle the projector carefully. Falling or shaking can damage internal
components.
6. Do not place heavy objects on top of the projector.
1. At the time of switching on, the indicative light does not work
①
. The power supply may not be well connected
②
. Check the overheating protection system
2. Pressing the power button on the remote control does not turn on the
projector
①
. The remote control batteries are empty
②
. The signal between the remote control and the IR sensor is obstructed
③
. Strong direct light on the IR sensor?
3. No image on the screen
①
. Is the channel setting correct?
②
. Is there an input signal?
③
. Is the input cable inserted correctly or is it in the wrong position?
④
. In PC mode the refresh rate is> 75KHz?
1. The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC
adapter. Ensure that the power supply meets this requirement before
attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A
damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord
from the outlet.
Supply
1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a
mild detergent. Never use strong detergents or solvents such as alcohol
or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to
scratch or damage the lens.
Cleaning
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31 32 33 34
35 36 37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63