7
leaves, or debris from the machine, always disengage the PTO, shut down the tractor engine,
remove the key, wait for all moving parts to come to a complete stop, disconnect the PTO
shaft from the tractor, then wait 5 minutes before removing processed material, leaves, or
debris from the machine.
• If the cutting mechanism strikes a foreign object or if your machine should start making an
unusual noise or vibration, immediately disengage the PTO, shut down the tractor engine,
remove the key, wait for all moving parts to come to a complete stop, disconnect the PTO
shaft from the tractor, then wait 5 minutes before inspecting for clogging or damage.
Vibration is generally a Warning of trouble. Clean and repair and/or replace damaged parts.
• Never tamper with safety devices. Check their proper operation regularly.
• Stay alert for hidden hazards or traffic. Never carry passengers on your machine.
• Never overload or attempt to chip material beyond the manufacturer’s recommendation;
see chapter 4. personal injury or damage to the machine could result.
• While using PTO chipper, don't hurry or take things for granted. When in doubt about the
equipment or your surroundings, stop the machine and take the time to look things over.
• Never operate the machine when under the influence of alcohol, drugs, or medication.
• Use the machine only in daylight.
• Keep all nuts and bolts tight and keep the equipment in good operating condition.
• Your PTO chipper is driven by a PTO shaft that transfers power from your tractor. A PTO
shaft is extremely dangerous and can cause serious injury or death. Read and understand all
of the safety and operating instructions manual that came with your PTO shaft.
No list of warnings and cautions can be all-inclusive. If situations occur that are not covered
by this manual, the operator must apply common sense and operate this chipper in a safe
