12
Before Use
USB charging cable
AC adapter*
Household power outlet
Charge the unit
・ Connect the main unit and USB charging cable as shown in the diagram to begin charging. While charging, the Display Lamps
will blink red on and off.
・ When charging is complete, the Displays Lamps will stop blinking and remain red before turning OFF after 1 minute. Remove
the USB charging cable.
・ At an indoor temperature of approximately 25° C, it will take about 3 hours to reach a full charge, which will allow the device to
operate for about 3 and a half hours.
Actual charging and operating time will differ depending upon the remaining power and the charging environment.
* If charging has not begun after about 10 seconds, check whether the USB charging cable or the AC adapter is loose.
* The form presented here is for illustration
purposes only.
Charging terminal
Display Lamps
Содержание Medi Lift Neck
Страница 33: ...32 Memo...