15
16
Rotate the electrode head 180° so that the EYE Mode electrodes are at the top.
Make sure that both electrodes are touching the skin, press the electrode heads down repeatedly from
the inner to the outer corner of the eye as if stamping the skin
(Press
→
Release
→
Move electrode heads).
Press the electrodes down on the skin for approx. 3 seconds.
* Do not use the device on the eyelids.
* Be sure not to press down continuously on the skin for longer than 3 seconds.
Ho
w to Use
Ho
w to Use
How to use the device on your skin
<CLEAN Mode>
Move the electrode head over the skin in the direction of the arrows shown below.
The LED light can be used to treat the upper eyelids, lower eyelids, and outer corner of the eye.
Areas you should not treat
Areas you should not treat
Areas that can only be treated with LED light
* Close your eyes and hold the device at least 5 cm away from the skin.
• Recommended speed for moving the device: approx. 2 cm per second
* If the temperature feels too hot, move the electrode head more quickly.
• One short beep will sound to indicate the half-way point in the operation time.
When you hear the beeps , begin care on the other side of your face.
• Use the device in a position in which the entire surface of the electrode head comes in contact with
your skin.
• Be sure to move the device over the skin while using (except in COOL Mode).
Placing the device continuously on the same area may cause burns or low-temperature injuries.
• Do not use on the upper eyelids (except in COOL Mode), lower eyelids, or outer corner of the eye
(except in EYE Mode and COOL Mode).
<NEO DYHP Mode>
<EYE Mode>
Move the electrode head over the skin
in the direction of the arrows shown below.
Press and move the device in a circular,
massaging motion as indicated by the arrows.
<COOL Mode>
Press the electrode head repeatedly on your face as if stamping on the skin
(Press
→
Release
→
Move electrode head).
* The device can also be used over the lower eyelids and outer corner of the eye. Turn off the vibration function.
* When using the LED light on the upper eyelids, lower eyelids or outer corner of the eye, be sure to close your eyes
and keep the electrode head at least 5 cm away from the skin.
Areas you should not treat
Look in a mirror
while you are using
the device
Areas that can only be treated with LED light
* Close your eyes and hold the device
at least 5 cm away from the skin.
EYE Mode Electrodes
