1. Connect the SMB connector to the Adapter and the BNC connector to the external trigger
port on the rear panel of the spectrum analyser
2. Connect the B-end of the USB cable to the USB port on the Adaptor and A-end to any
USB port on the computer.
EMScanner and Adapter ports
1. SMB external trigger cable port
2. LED light shows three stages:
Red: Boot mode (this stage is fast; you may not even notice it)
Orange: Initiation mode (checking adaptor’s firmware)
Green: User mode (adaptor is connected and ready)
3. USB connection port
4. Micro-D control cable connector - Adapter
5. Micro-D control cable connector - Scanner
6. RF output port
Содержание EMScannerR
Страница 1: ...EMScannerR Setup Guide V0 9 18052020...