Operation
WebRelay-10 Users Manual
Section 3: Operation
WebRelay-10 can be operated using a web browser, by sending text commands to an XML
status/control page, and/or by sending Modbus/TCP requests. In addition WebRelay-10 Plus™ model
allows you to control the relays using inputs, or events. (Using an input or event to control the relays was
described throughout previous sections of the manual, and will not be described here.)
3.1 Browser Operation
Once WebRelay-10 is set up, users can access the Control Page using a web browser by typing the IP
address of WebRelay-10 into the web browser address bar. For example, using the default IP address,
the user would enter http://192.168.1.2. If the IP address is changed from the default, the user must use
the new IP address. Note that if any port is used other than the default port 80, the port must also be
included in the request. For example, accessing the unit at port 8000 would be as follows:
http://192.168.1.2:8000.
The following screen appears when the Control Page is Selected:
page 54
Xytronix Research & Design, Inc.
Figure 3.1a - Control Page
Содержание WebRelay-10 X-WR-10R12-I
Страница 1: ...WebRelay 10 Title Page Goes Here...
