Xytronix Research & Design WebRelay-10 X-WR-10R12-I, Руководство пользователя

Страница: 45 / 107

WebRelay-10 Users Manual Installation and Setup
2.4.10 Events Scheduler Tab (WebRelay-10 Plus™ only)
Events can be programmed to turn the relays ON and OFF at specific times. Up to 100 events can be
created. Each event can occur one time or multiple times.
A list of all scheduled events and information about each event is displayed in a table. Events can be
sorted according to each column, in ascending or descending order. The following columns are
displayed.
-
Events Scheduler: On/Off : Turns scheduled events ON or OFF . ON is selected by default.
-
Current Date/Time : Displays the current date and time.
-
Event # : The number and name of events that are listed.
-
Schd # : The schedule where the event is located (0 is the default schedule).
-
Start Date/Time : The start date and time (24-hour) of the event.
-
Period : The time between the start of successive events.
-
Count : The number of times the event will occur.
-
Action : What action the relays or schedule will take
-
Act #(s) : Which of the relays or schedules, if any, will be affected by the event.
-
Pulse : If a relay pulse event is programmed, the Pulse Duration will be displayed.
-
Next Occurrence : The date and time of the event's next occurrence will be displayed. If the
event has already occurred, the event will be listed as “Inactive” here.
The events are color coded to indicate their status.
-
Gray – Event has not been set up.
-
Green – Events are active and will occur sometime in the future.
-
Red – Events have been temporarily disabled by the disable event action.
-
Yellow – Events have already occurred and are not scheduled to happen in the future.
Xytronix Research & Design, Inc. page 45
Figure 2.4l - Events Tab