1
INTRODUCTION
T
hank you for purchasing Xytronic’s high power soldering/desoldering station – the best
solution for all your soldering/desoldering equipment needs especially for the lead free
applications! We believe you will be more than satisfied with the many features and the
versatility of your new soldering/desoldering station.
Please carefully
read the instruction
manual to maximize the advantages of using your new LF-8800 soldering/desoldering
station.
WARNING:
This appliance is not intended for use by children or other persons without
assistance or supervision if their physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that they do not play with the
appliance. Failure to observe the safety regulation will result in a risk to life and limb. The
manufacturer shall not be liable for damage resulting from misuse of the unit or
unauthorized alterations.
CAUTION:
◆
Always place the soldering & desoldering irons in its original holder when not being
used.
◆
Keep the soldering and desoldering tip and heating element away from the body, clothes
and flammable material when in operation.
◆
The soldering and desoldering tip and the heating element are still remaining hot after
being switched off. Ensure that you do not touch the tips and the heating elements.
◆
For your health, do not inhale solder fumes.
◆
You must not undertake work on live parts. Only the technician is permitted to
undertake repairs. Use the original replacement part only.
◆
In order to extend the life of the PUMP, recommended intermittent operation mode,
each run 3 minutes, need to stop for 3 seconds.
KEY FEATURES
■
HEATER/SENSOR FAILED DETECTION: If sensor circuit failed that the display
reads “S--E” and cut off the heater power. If heater circuit failed the display will read
“H--E” and cut off the heater power.
■
TEMPERATUE “LOCK-OUT” FEATURE: The temperature can be locked by
“password” code that is convenient for production line management.
■
ESD SAFE AND SPIKE FREE CIRCUITRY: The “Zero Voltage” electronic
switching design also protects voltage and current sensitive components (CMOS
devices, etc.) against damaging current and transient voltage spikes commonly
produced by less efficient, mechanically switched stations.
■
DELAYED SUCTION: To eliminate the problem of solder clogging up the tip, a
Dystrybucja i serwis
Dane kontaktowe:
NDN - Zbigniew Daniluk
ul. Janowskiego 15
02-784 Warszawa
tel.: (22) 641-15-47
e-mail: [email protected]
NIP: 521-044-00-73
