1
INTRODUCTION
Thank you for purchasing Xytronic’s soldering and SMD rework station. This
appliance is specially designed for both lead free soldering and SMD chips, SOT, Flat
pack ICs’ etc. reworking without alternating the wands.
Please carefully
read the
instruction manual prior to operate to maximize the advantages of using your new
rework station.
WARNING:
This appliance is not intended for use by children or other persons
without assistance or supervision if their physical, sensory or mental capabilities
prevent them from using it safely. Children should be supervised to ensure that they
do not play with the appliance. Failure to observe the safety regulation will result in a
risk to life and limb. The manufacturer shall not be liable for damage resulting from
misuse of the unit or unauthorized alterations.
CAUTION:
◆
Always place the soldering iron or tweezers in its original holder when not being
used.
◆
Keep the soldering/tweezers tip and heating element away from the body, clothes
and flammable material when in operation.
◆
The soldering/tweezers tip and the heating element are still remaining hot after
being switched off. Ensure that you do not touch the soldering tip and the heating
element.
◆
For your health, do not inhale solder fumes.
◆
You must not undertake work on live parts. Only the technician is permitted to
undertake repairs. Use the original replacement part only.
KEY FEATURES
◆
HEATER/SENSOR FAILED DETECTION: If sensor circuit failed that the
display read “S--E” and cut off the heater power. If heater circuit failed the display
read “H--E” and cut off the heater power.
◆
TEMPERATUE “LOCK-OUT” FEATURE: The temperature can be locked by
“password” code that is convenient for production line management.
◆
ISOLATED HOLDER WITH TIP CLEANER: Made of low abrasive brass
shavings instead of conventional sponges to meet RoHS requirement cleans better
and no water is necessary.
◆
LOW VOLTAGE OUTPUT WITH SAFETY OPERATION: The power unit is
isolated from the A.C. line by a transformer and allows 32Vac to drive the heating
