16
Troubleshooting Tips for Loading Film
If material wraps around the top pinch roller:
1. Remove the bar located on the output side of the pinch rollers by lifting it out of the way.
3. Be careful not to damage the rubber rollers, feed some more material through the system.
4. Run enough material through the system to eliminate all wrinkles.
5. Remove the excess material.
Caring for your rollers
The XM4400 System rollers are of high quality and durability, however, to prevent non-warranty
damage, please observe the following precautions.
1. Clean only when needed, with recommended cleaning solution. Isopropyl alcohol rubbed lightly on the
rollers is good cleaning solution. Roller cleaning fluids are available commercially.
2. Be careful with knives or other sharp objects near the rollers. Cutting or puncturing a roller will cause
repeating marks in the rollers and is not covered under the machine warranty and may cause imprint
patterns into future laminated items.
3. Do not allow anything over 1 /16" thick objects to pass through the rollers. A large irregular object
passing through the rollers may cause damage to the rollers.
