Xylem YSI ProDSS, Руководство пользователя

Страница: 30 / 92

28
Operation
GPS (Optional)
→
GPS
GPS turns the ProDSS Global Positioning System On or Off. The
symbol is shown when a GPS signal is received ( Figure 33 ).
When enabled, the GPS coordinates will be saved with the GLP file and
logged data.
NOTE: GPS data will be most accurate when there is a clear line of sight
to satellites. GPS will not typically receive a signal while inside a
building.
Figure 33 GPS
6
7
5
4
2
3
1
Calibration menu
Push the
Cal
key to access the Calibration menu ( Figure 34 ). Highlight a sub-menu then push the
ENTER
key to view
sub-menu options.
Pre-defined or user-selected parameters are noted within brackets ( [] ). See “Alpha/numeric entry” on page 14 .
Refer to the Calibration section for sensor specific calibration procedures ( “Calibration” on page 33 ).
NOTE: Attached sensors are listed according to the bulkhead port in which they are installed.
NOTE: User ID, Probe ID, and User Field #1 and #2 must be enabled in the GLP menu to appear in the Calibration
menu ( “GLP Options” on page 17 ).
Figure 34 Calibration menu
1 Sensors connected to bulkhead 5 User ID
2
Optional Depth sensor calibration
6
Probe ID
3 Barometer calibration 7 User Field #1
4 Restore Default Calibration - restores
all calibrations to factory default