TruLab pH 1310
Settings
ba76156e01
03/2014
45
7.4.1 Resetting the measurement settings
The following settings for pH measurements are reset to the default settings
with the
Reset
function:
The sensor settings are reset under the
Reset
menu item in the menu for cali-
bration and measurement settings. To open it, press the
<F1>
/[Menu] or
<MENU/ENTER>
key in the measured value display.
7.4.2 Resetting the system settings
The following system settings can be reset to the default condition:
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Setting
Default settings
Buffer
YSI
Cal. interval
7 d
Unit for slope
mV/pH
Measured parameter
pH
Resolution pH
0.001
Resolution mV
0.1
Asymmetry
0 mV
Slope
-59.2 mV
Man. temperature
25 °C
One point calibration
No
Stability control
On
Temperature unit
°C
Setting
Default settings
Language
English
Beep
On
Baud rate
4800 Baud
Output format
ASCII
Contrast
50 %
Illumination
Auto
Switchoff time
1 h
