Xylem WTW SensoLyt 900, Руководство по эксплуатации

Страница: 4 / 12

Commissioning, measuring, calibration SensoLyt
®
900(-P)
4
ba75992s02 02/2017
2 Commissioning, measuring, calibration
2.1 Opening and closing the IDS plug connection
This section only applies to IDS plug variants (SenTix
®
... -P).
Opening the plug
connection
 If necessary, clean the plug connection
 Open the locking device (step 1)
 Use your thumb and index finger to press the clips of the connector
together, and pull the connector out of the plug (step 2).
Closing the plug
connection
 Make sure that the plug connection is completely dry and clean.
 Align the guidance of the connector with the groove in the plug and insert
the connector in the unlocked plug until it catches (step 3).
 Close the locking device (step 4).
2
4
3
1
Plug connection
closed and locked
Guidance
Groove