Xylem WTW OxiTop-i, Руководство по эксплуатации

Страница: 13 / 32

OxiTop
®
(-i/-IDS) Operation
ba77059e01 03/2019
13
Status LED The status LED indicates the current state of a BOD measurement.
The LED flashes slowly (approx. every 5 secionds).
4.2 Navigation
The principles of navigation in menus and dialogs are explained in the following
sections.
4.2.1 Operating modes
The instrument has the following operating modes:
Only those displays and functions are available in the active operating mode
that are currently being required.
4.2.2 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
 Select a submenu or change a numerical value with the
<

>
key.
 Using
<ENTER>
, activate (

) or deactivate a function, or
confirm a numerical value and switch to the next digit.
 Press
<M>
– to take over a selection / entry,
– to quit a menu/submenu/setting or
– to go to the superordinate level.
Color Explanation
BLUE The BOD measurement was started.
Green The BOD measurement is finished.
The status LED flashes green for approx. 24 hours.
Red The BOD measurement was started.
The measuring head is in a critical condition:
 The battery is nearly discharged
or
 The pressure in the sample bottles is too high.
For suitable measures, see section 6 W
HAT TO DO IF
...
Operating
mode Explanation
Measuring The measurement data of the connected sensor are shown
in the measured value display
Setting The display indicates a menu, submenu, settings or func-
tions