Xylem WTW NitraVis 700 Series, Руководство по эксплуатации

Страница: 19 / 56

NitraVis 70x IQ TS
Commissioning
19 ba75952e03 05/2017
Measuring location
NitraVis 701 IQ TS
:

Activation

Inlet

Outlet
NitraVis 705 IQ TS
:

Outlet
(permanently set)
Measurement location or application of
the sensor.

The possible measurement loca
-
tions are displayed depending on the
currently set measuring mode.

The sample matrix on which the cal
-
culation of the measured value is
based changes with the location of
the sensor.
When the measurement location is
changed, all virtual sensors are
deleted.
Measuring range
- Display of the measuring range
(see chapter 8 T
ECHNICAL DATA
).
Cal - # raw value 1
Value pairs of the user calibration (see section 4.3.2).
Note: Leave those values unchanged during the initial commission
-
ing.
Cal - ref. value 1
Cal - # raw value 2
Cal - ref. value 2
Zero adjustment
Factory
User
Setting of which zero adjustment is
used in the sensor.

Factory zero adjustment or

Zero adjustment carried out last
Signal smoothing

On

Off
Switching on/off the signal smoothing.
For details, see
Response time t90
.
Menu item Settings Explanations