MIQ/R6
Installation
9
ba75541d07
03/2018
3
Installation
3.1
Scope of delivery
MIQ module
Accessory set, including:
– 4 x cable glands (clamping range 4.5-10 mm) with seals and blind plugs
– 4 x ISO blind nuts M4 with suitable cheese-head screws and plain wash-
ers
– 2 x countersunk screws M3x6 to close the module lid
(+ 2 replacement screws)
– 1 x contact base with fixing screws
Accessory kit, including
– 1 x extension M16x1.5 to M20x1.5 with O-ring
– 1 x cable gland
Operating manual.
3.2
Basic principles of installation
3.2.1 Requirements of the measurement location
The measurement location must meet the environmental conditions specified in
section 6.1 G
ENERAL
DATA
.
Controlled
environmental
conditions
Work on the open instrument (e.g. during mounting, installation, maintenance)
may only be carried out under controlled environmental conditions:
3.3
Safety requirements on the electrical installation
Electrical equipment (e.g. motors, contactors, cables, lines, relays) must meet
the following requirements:
Conformity with national regulations (e.g. NEC, VDE and IEC)
Suitability for the electrical conditions at the installation site
– Maximum operating voltage
– Maximum operating current
Suitability for the environmental conditions at the installation site
Temperature
+ 5 °C ... + 40 °C (+ 41 ... +104 °F)
Relative humidity
≤
80 %
All manuals and user guides at all-guides.com
