Xylem SI Analytics HandyLab 600, Руководство по эксплуатации

Страница: 46 / 72

Settings HandyLab 600
46
ba77064e04 08/2021
7.3.3 Automatic
Stability control
The automatic
Stability control
(AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic
Stability control
function (see
section 7.3 S
ENSOR
-
INDEPENDENT SETTINGS
, page 44).
The measured parameter flashes on the display
 as soon as the measured value is outside the stability range
 when the automatic
Stability control
is switched off.
7.3.4 Automatic switch-off function
The instrument has an automatic switch-off function in order to save the
batteries (see section 7.3.1 S
YSTEM
, page 44). The automatic switchoff function
switches off the meter if no key is pressed for an adjustable period.
The automatic switchoff function is not active
 if a USB-B cable is connected
 if the
Automatic data storage
function is active, or with
automatic data trans-
mission
7.3.5 Display illumination
The meter automatically switches off the display illumination if no key is
pressed for 20 seconds.
The illumination is switched on with the next keystroke again.
You can also generally switch on the display illumination (see section 7.3.1
S
YSTEM
, page 44).