Xylem SI Analytics HandyLab 600, Руководство по эксплуатации

Страница: 44 / 72

Settings HandyLab 600
44
ba77064e04 08/2021
You can change the interval (1 ... 999 days):
7.2 ORP measurement settings
7.2.1 Settings for ORP measurements
The settings are made in the menu for measuring settings of the ORP measure-
ment. To open the settings, display the required measured parameter in the
measured value display and press the
<ENTER> key. After completing the set-
tings, switch to the measured value display with <M> .
Default settings are printed in bold .
7.3 Sensor-independent settings
7.3.1
System
To open the
Storage & config
menu, press the <ENTER_ > key in the measured
value display. After completing the settings, switch to the measured value dis-
play with
<M> .
Default settings are printed in bold .
1. Open the menu for measurement settings with <ENTER> .
2. In the
Calibration
/
Calibration interval
menu, set the calibration interval
with <
V
><
W
> .
3. Confirm the setting with <ENTER> .
4. Quit the menu with <M> .
Menu item Possible setting Explanation
mV resolution 0.1
1
Resolution of the mV display
Reset -
Resets all sensor settings to the
delivery condition (see section
7.4.1 R
ESETTING THE MEASUREMENT
SETTINGS
, page 47).
Menu item Possible setting Explanation
System
/
General
/
Lan-
guage
Deutsch
English
(more)
Selects the menu language
System
/
General
/
Audio
signal
on
off
Switches on/off the beep on keystroke
System
/
General
/
Illumi-
nation
Auto
on
off
Switches the display illumination on/off