TLC 750 BT / TLC 750 NFC
Operation Manual
Page 6
5.5 Logging modes
5.5.1
AdHoc logging mode
This mode offers real time measurement data transmission via a Bluetooth LE connection. In
addition measurement values can be stored at internal storage memory for
readout at a later
time.
The device has to be programmed by host software for this mode.
Step
Description
LCD display
1
In infrared mode temperature measurements are taken
while
button is pressed.
In penetration probe mode temperature measurements are
taken while no key is pressed.
2
In infrared mode temperature value is held if
button is
released. In this state device
alternately shows “HOLD”
and “SAVE”.
In penetration probe mode temperature measurement is
held if
button is shortly pressed. In this state device
alternately shows “HOLD” and “SAVE”.
If Bluetooth is connected measurement data is transferred
via Bluetooth.
Only available at TLC 750 NFC device:
If
button is pressed down the internal NFC reader
searches every time once for NFC tags.
If a NFC tag was found
device shows “TAG” and
alternately “HOLD” and “SAVE”.
If Bluetooth is connected
NFC tag
data is transferred via
Bluetooth.
3
To store measurement to internal storage memory
button has to be pressed. Device
confirms with "OK".
To discard measurement
button has to be pressed.
Device
confirms the memory with the display "CLR".
Pressing
takes a new measurement.
Only available at TLC 750 NFC device:
To store NFC tag data to internal storage memory
button has to be pressed. Device
confirms the memory
storage executing with "OK".
To discard NFC tag data
button has to be pressed.
Devices confirms with
"CLR".
Pressing
takes a new measurement.
