background image

WARRANTIES ARE LIMITED TO REPAIRING OR REPLACING THE PRODUCT
AND SHALL IN ALL CASES BE LIMITED TO THE AMOUNT PAID BY THE BUYER
FOR THE DEFECTIVE PRODUCT. IN NO EVENT SHALL SELLER BE LIABLE FOR
ANY OTHER FORM OF DAMAGES, WHETHER DIRECT, INDIRECT, LIQUIDATED,
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY OR SPECIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFIT, LOSS OF
ANTICIPATED SAVINGS OR REVENUE, LOSS OF INCOME, LOSS OF BUSINESS,
LOSS OF PRODUCTION, LOSS OF OPPORTUNITY OR LOSS OF REPUTATION.

Limited consumer warranty

Warranty. For goods sold for personal, family or household purposes, Seller
warrants the goods purchased hereunder (with the exception of membranes,
seals, gaskets, elastomer materials, coatings and other "wear parts" or
consumables all of which are not warranted except as otherwise provided in the
quotation or sales form) will be free from defects in material and workmanship
for a period of thirty (30) months from the date of installation or thirty-six (36)
months from the product date code, whichever shall occur first, unless a longer
period is provided by law or is specified in the product documentation (the
“Warranty”).
Except as otherwise required by law, Seller shall, at its option and at no cost to
Buyer, either repair or replace any product which fails to conform with the
Warranty provided Buyer gives written notice to Seller of any defects in material
or workmanship within ten (10) days of the date when any defects or non-
conformance are first manifest. Under either repair or replacement option,
Seller shall not be obligated to remove or pay for the removal of the defective
product or install or pay for the installation of the replaced or repaired product
and Buyer shall be responsible for all other costs, including, but not limited to,
service costs, shipping fees and expenses. Seller shall have sole discretion as to
the method or means of repair or replacement. Buyer’s failure to comply with
Seller’s repair or replacement directions shall terminate Seller’s obligations
under this Warranty and render this Warranty void. Any parts repaired or
replaced under the Warranty are warranted only for the balance of the warranty
period on the parts that were repaired or replaced. The Warranty is conditioned
on Buyer giving written notice to Seller of any defects in material or
workmanship of warranted goods within ten (10) days of the date when any
defects are first manifest.
Seller shall have no warranty obligations to Buyer with respect to any product or
parts of a product that have been: (a) repaired by third parties other than Seller
or without Seller’s written approval; (b) subject to misuse, misapplication,
neglect, alteration, accident, or physical damage; (c) used in a manner contrary
to Seller’s instructions for installation, operation and maintenance; (d) damaged
from ordinary wear and tear, corrosion, or chemical attack; (e) damaged due to
abnormal conditions, vibration, failure to properly prime, or operation without
flow; (f) damaged due to a defective power supply or improper electrical
protection; or (g) damaged resulting from the use of accessory equipment not
sold or approved by Seller. In any case of products not manufactured by Seller,
there is no warranty from Seller; however, Seller will extend to Buyer any
warranty received from Seller’s supplier of such products.
THE FOREGOING WARRANTY IS PROVIDED IN PLACE OF ALL OTHER EXPRESS
WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

9  Product Warranty

34

20-18 Installation, Operation, and Maintenance Manual

Содержание Bell & Gossett Ecocirc+ 20-18









































Отзывы: