Xycom XVME-979, Руководство пользователя

Страница: 12 / 27

Chapter Two - Installation
11
Chapter 2 – Installation
This chapter describes how to install the XVME-979 Mass Storage Module into the
VMEbus backplane. It also provides information on connecting the XVME-979 to
Xycom’s XVME-65x and XVME-660 VMEbus PC/AT processor modules.
Installing into a VMEbus Card Cage
The XVME-979 occupies only one double-high VMEbus slot, and fits into any standard
6U VMEbus card cage. Like all of Xycom’s modules, the XVME-979 is designed to
comply with all electrical VMEbus backplane specifications. This module only draws
current from the +5 volt power supply.
Caution
Never attempt to install or remove any boards before turning
off power to the bus and all related external power supplies.
Before installing a module, determine and verify all
connections to external devices or power supplies.
Technical Note
It should not be necessary to use excessive force or pressure
to engage the connectors. If the board does not connect
properly with the backplane, remove the module and inspect
all connectors and guide slots for possible damage or
obstructions.
The XVME-979/1 is a CD-ROM only version. To complement your system, use the
XVME-977, which comes with a three-connector 64-pin ribbon cable to distribute the
IDE and floppy drive signals.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com