Xycom XVME-653, Руководство пользователя

Страница: 43 / 113

Chapter 3 – BIOS Setup Menus
3-9
Numlock Submenu
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
Keyboard Features Item Specific Help
Numlock: [Auto]
If the line item you are viewing
Key Click: [Disabled]
has specific help, it will be listed
Keyboard auto-repeat rate: [30/sec]
here.
Keyboard auto-repeat delay: [1/2 sec]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
&
Submenu F10 Previous Values
Figure 3-6 Numlock Submenu
Table 3-6 Numlock Submenu Options
Option Description
Numlock Determines how the BIOS defines the numlock key at power up or soft reset.
Normally, the BIOS sets the numlock on (numeric keys selected) if it detects a
101- or 102-key keyboard at power up. If it detects an 84-key keyboard, it turns
numlock off (cursor keys selected). Select
Auto to keep this state, On to select
the numeric keys regardless of keyboard, or Off to select cursor keys regardless
of keyboard. The default is Auto .
Keyboard click Provides audible keypress feedback by having the BIOS click through the system
speaker every time a key is pressed, if
Enabled . This option is only valid for sys-
tems with a speaker connected to the speaker jack. The default is Disabled .
Keyboard auto-repeat rate Defines the rate at which the keyboard repeats while a key is pressed. The
higher the number, the faster the key repeats. The default is
30/sec , or 30 times
per second.
Keyboard auto-repeat delay Sets the delay time after a key is held down, before it begins to repeat the key-
stroke. The default is a
1/2 sec .