Xycom XVME 590, Руководство пользователя

Страница: 23 / 102

XVME-500/590 Manual
February, 1988
Table 2-l. XVME-500/590 Jumpers (cont’d)
J6,J8,J9 Selects fixed-gain amplification factor on version 1
ONLY (see Section 2.6.4.2)
J7 Used only for modifying version 1 for resistor
programmable gain (see Section 2.6.4.3)
J14,J15,J16,Jl8,
J19,J20 This jumper configuration controls gain ranges for
programmable gain amplifier (versions 2 & 3) (see
Section 2.6.4.1)
J17 This jumper is installed to provide ground reference
for external trigger; J2 1 must be removed if this
option is used (see Section 2.6.4.5)
J21A,J21B,J21C,J21D,
J25
These jumpers are used together to determine if the
inputs will be configured as either 8 differential,
16 single-ended or 16 pseudo-differential input
channels (see Section 2.6.2)
J22A,J22B,J22C,
J22D
J23,J24
Each jumper is used to determine settling times for
the appropriate module amplifier (see Section 3.4.1)
These two jumpers are provided to allow grounding
of an input channel in either the single-ended or the
differential input mode of operation for purposes of
calibration (see Section 2.6.5)
J32 (XVME-590 Only) Connects Analog to Digital GND. J32 is jumpered in
foil and can be cut if the user desires.
2.5 VMEbus OPTIONS
The XVME-500/590 is designed to be addressed within the VMEbus Short I/O
Memory Space.
Since each module connected to the bus must have its own unique
base address, the base-addressing scheme for XVME input modules has been designed
to be jumper-selectable.
When the XVME-500/590 is installed into the system, it
will occupy a lK-byte block of Short I/O Memory Space.
The XYCOM base address decoding scheme for input modules is such that the
starting address for a module will always reside on a 1K boundary.
Thus, the
module base address may be set for any one of 64 possible 1K boundaries within the
Short I/O Address Space.
2-7