United States FCC Part 15, Subpart B, Class A EMI
Compliance Statement
Note:
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his
own expense.
Warning For European Users
This is a Class A product. In a domestic environment this product may cause radio interfer-
ence, in which case the user may be required to take adequate measures.
Electromagnetic Compatibility Warning
The connection of non-shielded equipment interface cables to this equipment will invalidate
FCC EMI and European Union EMC compliance and may result in interference and/or sus-
ceptibility levels which are in violation of relevant regulations. It is the responsibility of the
system integrator and/or user to obtain and use shielded interface cables and equipment used
with this device as described within the 9485/9487 manual. If this equipment has more than
one connector, do not leave cables connected to unused interfaces. Changes or modifications
not expressly approved by the manufacturer could void the user’s authority to operate the
equipment.