manualshive.com logo in svg

Xycom 9465 PC/AT, Руководство пользователя, Страница: 4 / 87

Поделиться
Скачать
Xycom 9465 PC/AT Скачать руководство пользователя страница 4

i

Table of Contents

Chapter 1 – Introduction ..........................................................................................................................1-1

Product Overview .................................................................................................................................................. 1-1
Standard Features................................................................................................................................................... 1-1

With AHIP5+ board............................................................................................................................................ 1-1
With AHIP6+ board............................................................................................................................................ 1-1
On all units.......................................................................................................................................................... 1-1

Optional Features................................................................................................................................................... 1-2
Unpacking the System ........................................................................................................................................... 1-3
Quick Start-up........................................................................................................................................................ 1-4

Chapter 2 – Testing..................................................................................................................................2-5

Preparing for the Tests........................................................................................................................................... 2-5
Running the Tests .................................................................................................................................................. 2-7

Chapter 3 – Installation ............................................................................................................................3-1

System Components............................................................................................................................................... 3-1
9465 Front Panel.................................................................................................................................................... 3-1
9465KPM Front Panel ........................................................................................................................................... 3-3
I/O Panel ................................................................................................................................................................ 3-5
Back Panel ............................................................................................................................................................. 3-7
Bottom Panel ......................................................................................................................................................... 3-7
Power Panel ........................................................................................................................................................... 3-8
Installation Options................................................................................................................................................ 3-9
Internal Hardware Options..................................................................................................................................... 3-9

DRAM and Additional DRAM Single In-Line Memory Modules (SIMMs) ...................................................... 3-9
PC/AT or PCI Boards ......................................................................................................................................... 3-9

External Hardware Options.................................................................................................................................. 3-10

Externally Mounted Floppy Drive .................................................................................................................... 3-10
Front Access Keyboard and Floppy Connectors ............................................................................................... 3-12
Serial AUX ....................................................................................................................................................... 3-14

Creating a Custom Logo ...................................................................................................................................... 3-14

9465 .................................................................................................................................................................. 3-14
9465KPM.......................................................................................................................................................... 3-14

Creating Custom Keypad Inserts (9465KPM only) ............................................................................................. 3-15
Installing Operating Systems ............................................................................................................................... 3-17
Installing Drivers ................................................................................................................................................. 3-18
Ethernet Drivers................................................................................................................................................... 3-18
Video Drivers ...................................................................................................................................................... 3-19
Touchscreen Drivers ............................................................................................................................................ 3-19
CD-ROM Drivers ................................................................................................................................................ 3-19
Miscellaneous Drivers ......................................................................................................................................... 3-19
Using a Touchscreen............................................................................................................................................ 3-20
Using a Pointing Device with a Touchscreen ...................................................................................................... 3-21
Specifying the Port............................................................................................................................................... 3-21
Calibrating the Touchscreen ................................................................................................................................ 3-21
Video Expansion.................................................................................................................................................. 3-21

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание 9465 PC/AT
























































































Отзывы:

Нет отзывов