5019T Flat Panel Industrial Touch Monitor Chapter 2 – Installation
19
143627(A)
Insert the hook section into the slots and tighten the fastener with a
screwdriver, as shown.
Figure 2-4. Fastening the Monitor to the Panel
VESA Arm Mounting
Your 5019T monitor also accommodates 100mm interface pads for VESA
arm mounting. Figure 2-5 gives the dimensions for arm mounting.
Please note that there are 3 sets of mounting holes on the back of the 5019T
monitor: one for mounting the monitor on a 100 mm VESA arm; one for
attaching a Xycom Automation 1506 Node PC to the monitor; and one for
attaching a Xycom Automation 1300 Thin Client PC to the monitor. Refer to
the respective user manual for instructions on mounting the 1506 Node PC
(using 10/32”machine screws) or the 1300 Thin Client PC (using
6/32”machine screws).
Figure 2-5. VESA Arm mounting diagram
Panel
Display
Unit
Mounting Clip
