Xycom 1510, Руководство пользователя, Страница: 3 / 41

Revision Record
3
Revision Description Date
A Manual Released 02/01
B Update notes/UL 04/01
Xycom Automation Part Number 140412
Trademark Information
Brand or product names are registered trademarks of their respective owners.
Windows is a registered trademark of Microsoft Corp. in the United States and other countries.
Copyright Information
This document is copyrighted by Xycom Incorporated (Xycom) and shall not be reproduced or
copied without expressed written authorization from Xycom.
The information contained within this document is subject to change without notice. Xycom
does not guarantee the accuracy of the information and makes no commitment toward keeping
it up to date.
United States FCC Part 15, Subpart B, Class A EMI Compliance Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equip
ment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
For European Users:
WARNING
This is a Class A product. In a domestic environment, this product may cause radio interference
in which case the user may be required to take adequate measures.
INSTALLATION: Electromagnetic Compatibility WARNING
The connection of non-shielded equipment interface cables to this equipment will
invalidate FCC EMI and European Union EMC compliance and may result in
electromagnetic interference and/or susceptibility levels which are in violation of
regulations which apply to the legal operation of this device. It is the responsibil-
ity of the system integrator and/or user to apply the following directions which
relate to installation and configura
tion:
1. All interface cables must include shielded cables. Braid/foil type shields are recommended.
Communication cable connectors must be metal, ideally zinc die-cast backshell types, and
provide 360 degree protection about the interface wires. The cable shield braid must be
terminated directly to the metal connector shell, ground drain wires alone are not adequate.
2. Protective measures for power and interface cables as described within this manual must
be applied. Do not leave cables connected to unused interfaces or disconnected at one end.