xxodd Nano Go 3, Руководство пользователя

Страница: 9 / 19

1.2. There are 4 charging LED indicators. The white
indicators will flash in turn when charging, and will stop
flashing and stay lightened when the charging is
completed. Attention: For the initial use, the battery of
the projector shall be fully charged for about 4-5 hours.
The working hour of projector is above 2.5 hours.
1.3
．
Press the power key to check the battery status.
When only one lightened LED indicator is left, it means
the battery of the projector is low. Connect the power
adapter and charge the projector promptly to avoid the
automatic power off when the battery is low.
2. Connection of projector
2.1 Connect the power adapter with the power
connected to the USB power interface of the projector.
2.2. Connect one end of the HDMI cable (included in
the packaging) to the HDMI interface of the projector,
and other end to a device like notebook, smartphone,
tablet etc. (Notes:certain device may need a converter
to connect the HDMI data cable) Or connect the HDMI
interface of MHL cable (included in the packaging) to
the projector, and Micro-USB interface of the data
cable to the smartphone.