XX.Y BTT009, Руководство пользователя

Страница: 4 / 12

Charging the battery
TX Mode
Selecting mode: Please turn the TX/RX switch to TX mode before
switching on THE BT TRANSCEIVER.
Note: TX or RX mode cannot be changed after switching on THE BT
TRANSCEIVER.
1. Switching on/off the transmitter
Switching on transmitter Press button
for 3-4 seconds Blue LED is on for
1second
Switching off transmitter Press button
for 3-4 seconds Red LED is on for 1
second and then off
4
Getting started
1. Charging the battery of THE BT TRANSCEIVER
First time charging:
Please charge the battery fully before use the transmitter.
Low battery
When you see the red LED flashes during use, the battery is low
power and needs to be charged.
1. Plug charger or charging cable into the standard AC power socket
2. Plug other end of charger or charging cable into charging port of
THE BT TRANSCEIVER
RED light on
→
Charging
RED light off
→
Charging finished
3. It will take about 3 hours to fully charge tranceiver
Please don’t attempt to take out the battery from the THE BT
TRANSCEIVER as this might damage it
Warning:
1) The battery is recyclable.
2) Do not dispose of the battery in fire, as it may cause explosion.