Professional Nozzle Usage Directions
Standard Nozzle
Aiming the nozzle at a 90-degree angle, start with the back teeth and follow
the gumline, pausing briefly between teeth. Hold the nozzle slightly away
from the gums to all ow the water flow to remove plaque and food.
Orthodontic Nozzle
Gently glide the nozzle along the gumline, pausing briefly to lightly brush the
area between the teeth and all around the orthodontic bracket.
Dental Plaque Nozzle
Place the nozzle close to the teeth so that the bristles are gently touching.
As you water floss, gently glide the nozzle along the gumline. Pause briefly
between teeth to gently brush and all ow the water t o f low between the
teeth.
Periodontal Nozzle
With the device turned off, set the pressure to the lowest setting. Place the
soft nozzle against the tooth at a 45-degree angle and gently place the nozzle
under the gumline and in the pocket. When ready, turn on the device to
Cleaning and Maintenance
It is normal and harmless if there are water residues in the product after
shipping, as each device has been tested with water be for e shipping.
Nozzle
Rinse with water and wipe dry with a soft cloth.
It is recommended to change the nozzle every 6 months.
If the nozzle is deformed, please replace with a new one.
Reservoir and Suction Hose
Empty any remaining water from the reservoir after use.
Remove the limescale in the reservoir with warm water less than 40 °C and
wipe dry before replacing.
Main Device Body
Wipe the surface clean with a cleaning cloth and wipe dry.
Do not use diluter, gasoline and alcohol.
Do not immerse the unit in water to clean.
Do not clean with water warmer than 40
°C.
31
32
