5
5. Installation
continued
6. Connection
Figure 3
Figure 4
1.
Connect the video output (BNC Connector)
to a monitor or other video device through
a 75 Ohms type coaxial cable.
2.
To connect the power source, insert the
DC Power plug into the DC Jack on the
camera’s trailing lead. (as shown in
Figure 4).
ADJUSTING LENS
Make the Zoom Adjustment by rotating the screw
anticlockwise for NEAR adjustment and clockwise
for FAR ( ) adjustment until you get the desired
view. Next make the Focal Adjustment by rotating
the screw anti-clockwise for TELE adjustment and
Clockwise for WIDE adjustment until you get the
desired view.
After adjustment tighten both.
NEAR
FAR
( )
WIDE
TELE
FOCUS
ZOOM
