10
Figure 1-5
Note
The video port is covered the heat shrink tube of high shrinking ratio. After the video
connection, please heat the tube to make sure the video port is damp proof and water
proof.
1.2.3 Install the speed dome
After you complete the above steps, please pull the integration cable and multiple-function
composite cable to the wall mount bracket.
Line up the straight edge of the internal enclosure of the quick installation speed dome to the
straight edge of the quick installation port, and then push the speed dome to the bottom of the
port slowly. Use your hands to turn the three stainless screws of the quick installation port to the
groove of the internal enclosure of the quick installation speed dome. Turn the stainless screw of
straight edge of the quick installation port to the
Ф
6.5 hole of the straight edge of the internal
enclosure of the quick installation speed dome. Use the inner hex tool to fix these three stainless
screws. Now you have completed the installation. See Figure 1-6.
